In Modern Home improvement, integrated ceiling has become an indispensable product. However, during the construction process, the lazy construction workers or the ownerâ€™s negligence in understanding the decoration will cause cracking in the ceiling construction. The risk, which not only affects the appearance, but also may fall, threatening the personal safety of the owners. How to grasp the details in the construction, we will introduce the method of identifying the integrated ceiling and the installation steps of the integrated ceiling .
Identify the method of integrated ceiling:
A. Look: The surface of inferior buckles looks uneven and there are particles. The high quality board looks very flat and the panel is soft.
B. Smell: Using a lighter to burn the corner of a poor quality board, it burns in 30 seconds, and there is a pungent odor of burning charcoal. Even if it is burned to a low temperature, rolling oil-resistant ceilings will not have a pungent odor.
C, touch: the temperature of the surface of the coated plate is the temperature of the plastic, so it is relatively high, to be warm, the temperature of the plate surface is the temperature of the metal, to be cool.
D. Listen: With the corner of the hand-held panel, gently tap the center of the panel, the sound of the membrane is boring, and the sound of the roller-coating board is crisp.
E, scraping: difference between the quality of the roller-coating board, the poor roll-rolled board will have a slight burst in the bending, hand scraping will scratch the surface layer, a good pinch plate will not.
Integrated ceiling ceiling installation steps:
1: In the ceiling integrated ceiling, because the process of ceiling ceiling integration is not up to the standard, the most vulnerable part is the corner. In the traditional wooden keel ceiling decoration, due to the effect of thermal expansion and contraction, the wooden frame easily forms tension and shrinks on both sides, directly leading to the corners being unable to bear force, thus causing ceiling cracking. Seriously, even smallpox falls off.
2: When using the keel base layer, if the wood keel structure is used, first apply fireproof dampproof paint on the wooden keel (as shown in the figure), to avoid the hidden dangers of moisture and insects in the future.
3: When playing the keel base layer, we can use expansion screws to fix (as shown in the figure, a complete wood with 2-3 expansion screws can be), using 300X300 interval (as shown in figure), this structure is stronger The force is more even, avoiding the uneven force caused by smallpox due to time, and falling off due to the influence of gravity.
4: When the gypsum board is capped, it adopts "L" shape to deal with corners, which can avoid the situation of easy cracking at the corners of late ceiling.
5: On the ceiling, the joints between the gypsum board and the gypsum board are treated with "V" stitching, which makes it easier to fill the porcelain powder in the later stage.
6: During the ceramic powder project, the gaps filled with gauze or kraft paper are covered (even if the ceiling cracks, the surface of the porcelain powder is not visible from the surface because it adheres to the gauze or kraft paper) on gauze or kraft paper. Porcelain powder construction.
7: After making porcelain powder and latex paint, a durable smallpox will be completed.
Xiao Bian summary: The method of identifying the integrated ceiling and the installation steps of ceiling integrated ceiling are introduced here. For more information, please pay attention to this website.
Integrated ceiling integrated ceiling brand
SIPs are high performance thermal efficient composite panels which consist of a sandwich of two layers of structural board with an insulating layer of foam in between for walls, roofs and floors in new residential and commercial buildings.
B. Design theory:
product_1Structural Insulated Panels (SIPs) have become a widely used alternative construction material for homes and other buildings. While many types of Composite Panel building systems have been developed, SIPs now usually refers to panels made from a thick layer of foam (polystyrene or polyurethane) sandwiched between two layers of Oriented Strand Board (OSB), plywood or fiber-cement. The result is an engineered panel that provides structural framing, insulation, and exterior sheathing in a solid, one-piece component.
The basic design concept for SIPs is elegant in its simplicity, and offers several advantages for constructing walls and roofs. Bonding the foam core to the stiff outer skins creates a web-and-flange structural strength (along the same principal as an I-beam) across the length and breadth of the panel. With the capacity to handle axial, bending, racking, and shear loads, properly designed and assembled SIPs not only replace conventional framing, but will withstand high wind, and seismic forces.
C. Advantages to use EPS Foam Sandwish Panels:
High quality construction method.
Comfortably warm, clean, and quiet.
Equal or lower first costs.
Lower long term operating costs.
Incentives available from utility service provider for energy efficient design.
Lower maintenance costs for you.
Construction Process Benefits
Easy to construct, with short learning curve.
60% shorter construction time
Quick turnaround time for greater satisfaction.
Increased builders production capacity.
50% less framing lumber.
50% more energy efficient.
Requires less room at building site (less site disturbance).
Less construction waste.
SIPs are prefabricated systems used primarily for walls and roofs. SIPs employ composite materials, reduce waste through modular construction methods, achieve high insulation
Osb Sip,Sandwich Panels,Insulated Sandwich Panel,Sandwich Roofing Sheets,structural insulated panels, OSB facing sandwish panels,high-performance insulation material
Dalian Quacent New Building Materials Co.,Ltd. , https://www.quacenthomes.com